![]() |
|
|||||||
| Register | Gallery | FAQ | Glossary | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Guru
![]() ![]() ![]() ![]() ![]() ![]() Join Date: 20 Jan 2004
Location: Southampton
Age: 40
Posts: 493
Thanks: 0
Thanked 1 Time in 1 Post
Car: Fiat Ulysse Eleganza 2.0 16V AutoCountry of origin: |
Westfalia Removeable Tow Bar
I have for sale a brand new Westfalia removeable tow bar with special wiring loom for the Fiat Ulysse, C8 and 807. This wiring loom means you don't have to cut any cables, it all just plugs into the existing loom. It also includes a special connection to switch off the reversing sensors when a trailer is connected.
There are no holes to drill as all the fixings use existing holes in the chassis. You only have to cut a small part of the rear bumper, which cannot be seen. The markings for this are already on the inside of the bumper. The tow bar was fitted to our car for 2 weeks, but we needed a bigger engined car to tow our boat. It is complete with all the fixings, spare keys for tow bar, electrics etc. Easily DIY fitted and takes less than 90 minutes to fit. These cost £290.00 so bargain at £160.00. We can ship in the UK for £10.00 most of the EU for £25.00. |
| poggy is offline |
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|