![]() |
|
|
#1 (permalink) |
|
Greenhorn
Join Date: 28 May 2008
Location: Düsseldorf
Age: 44
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Car: Lancia PhedraCountry of origin: |
PDC problem
I own a Phedra DVD Edition which has PDC built in. My problem is that I had problems with my left outermost sensor once a while, which notices obstacles which were not there, however this happens only when he had become wet, when he has become dry again, the system works ok, what hindered me from trying any repair. However now the pdc stops working, which means that none of the sensors detects an obstacle allthough the display and the one short beep should gives me an otherwise impression. I checked the connectors, disconnecting those I immediately get the warning in the display. I am now not sure, whether one defect sensors may stop the others from working without any alarm or whether the control unit is defect. Your input is very welcome!
Thanks in advance Bernard Lohmanns |
| bernardlo is offline |
|
|
|
#2 (permalink) |
|
Master
Join Date: 25 Oct 2009
Location: Budapest
Posts: 88
Thanks: 3
Thanked 8 Times in 8 Posts
Car: Peugeot 807 2.2HDI 170Engine: 2.2 HDI/JTD 170 Country of origin: |
I would guess, that the control unit is bad.
I don't think, that every sensor got dead at once... First I would try a BSI reset (after stopping the motor, wait at least 5-10 mins, then disconnect the battery, wait 10mins again, and reconnect the battery. You will have to teach the window end-positions, and set the clock) |
| mnmn is offline |
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|