make a new skin for our RTx

[mira308sw]

Originally Posted by menda

What is ACLK_0000?? Has it something to do with the clock/compass discussion?
If I change 0004 offset to "1", will it enable analog clock??

they are the parameters for analog clock drawing

"Overall" parameters seem to be the one to put analog clock over all other drawing, but unlikely doesn't do it.

[northernlanes]

I've been interested in modifying the Radar/Dangeruos Zones icon for ones I've been familiar with and I think Mira's program could be the (only) way to do it.
I have 2 icons I made myself a long time ago (see attached files below), I've briefly looked at Mira's help file for GPH_Editor and after loading in some of the many files I'm not sure if all the instances of the graphics I need to modify (Radar & Dangerous Zone graphics) are repeated several times (maybe for each colour scheme ie: Titanium, Blue etc etc) and therefore they all need to be modified. My unit is an RT4 (Peugeot 407) so I assume the hi-resolution graphics that an RT5 uses can be left, and I normally (but not always) use the Titanium backgroud.

I've also attached a modded screenshot of what I want to achieve. Can someone point me in the right direction, OR if you want create the files I require so I can just install them myself please do so .. It would save me struggling to get to grips with the software. Many thanks. Great program Mira !!

[mira308sw]

i think there are only these 6 image for radar alert:








TXUR000B and TXUR000C are used for RADAR_CONTROL in guidance with speed indication, in the right-top corner of the map.
TXUR0011 and TXUR0039 the same for DANGEROUS_ZONE
TXUR000F is the icon in the popup message for RADAR_CONTROL
TXUR003C is the icon in the popup message for DANGEROUS_ZONE

used dimension are (you must see IMAG definition to retrieve them):
TXUR000B and TXUR000C : 80x39
TXUR0011 and TXUR0039 : 80x39
TXUR000F : 60x60
TXUR003C : 60x60

[northernlanes]

And are these repeated for each of the 5 colour schemes .. Titanium (HARM00) ... .... ... Carbon(HARM04), therefore to change all schemes I need to replace 30 bmp's, but just to change one (ie Titanium) just change the 6 bmp's under HARM00 folder ?


Alternative Speed camera icons attached if anyone needs them.

[northernlanes]

Mira, I've created replacement GEN_HA00.gph files (from HARM00 folder .. Titanium) ... these are to replace the speed camera icons with my own as mentioned in the previous posts, I've done two .. one was with the B+W icons and the other using my yellow icons.

Could you please look at them and see if they look ok, also ..

I copied & pasted the original files directly from my RT4's harddrive to my pc (I had it out of the unit to do a full backup on my pc), if I copy them back to the harddrive the same way will that work ok? I know you have the utility RTxCopy that could be used but does that copy the whole system, or can it be used just to upload these files only?

Thanks

See attached files

[northernlanes]

It works! , I've replaced the GEN_HA00.gph files in the HARM00 folder using the attached file (I used the yellow ones as they represent the colour of UK speed cameras) and now the pop-up RADAR and DANGEROUS ZONES icons are now replaced with my own, I've also modded the other coloured background themes contained within the other HARMxx folders. I had the hard-drive out of the RT4 and just copied/pasted from the PC to replace the originals with my modded ones.

Now I need to find/mod the POI icon image files for the RADAR and DANGEROUS ZONES on the actual maps! Are the Mapping POIs accessable and also in gph format ??

[mike170469]

see my new "Color Themes" page at: http://mira308sw.altervista.org/themes[/quote]

I have just got the SIMPSONS as a theme on my RT4 I'm so HAPPY !!